Audit → Design → Implementation
Energy efficiency and power quality
Energy efficiency and power quality service for industry and private clinics in Colombia: energy audit, energy management system (EnMS), power quality studies, and power factor correction banks for compliance with CREG regulations.
Energy efficiency and power quality for industry and clinics
The consumption of a plant or a clinic changes over the years, but rarely is it measured where the losses are concentrated. The energy audit quantifies the operation’s actual consumption and identifies bill-reduction opportunities, so that every investment decision is based on data rather than assumptions.
A power factor below the required value results in charges for reactive energy and exposes the operation to penalties under CREG regulation. The service sizes and implements a power factor correction bank to adjust the power factor to the regulatory framework and eliminate the associated charges.
Harmonics, voltage sags, and imbalances affect the performance of sensitive equipment, particularly in clinics and process industries. Power quality studies measure these parameters on site and determine the origin of faults, distinguishing when the cause lies in the grid and when in the equipment.
Energy efficiency service solutions
Energy audit as the starting diagnosis
The service begins with an energy audit that measures and analyzes the operation’s consumption to identify losses, bill-reduction opportunities, and investment priorities. The resulting diagnosis defines the efficiency roadmap and prioritizes subsequent actions.
Power factor correction bank for CREG compliance
The service designs and implements a power factor correction bank sized to the operation’s actual load, in order to bring reactive energy within CREG regulatory requirements and eliminate the associated charges. As panel manufacturers, the bank is adjusted to the specific conditions of each installation.
Power quality studies and management
The service carries out power quality studies and implements an energy management system (EnMS) to sustain performance over time in a measurable way. When a study requires thermography, it is coordinated with a specialized laboratory to complete the diagnosis.
Service components
Energy efficiency service components
The service follows a three-stage engineering process—audit, design, and implementation—and is structured into five components that are activated according to the operation’s needs. The energy audit is the starting point; from its diagnosis, the process moves toward regulatory compliance, power quality, and ongoing consumption management.
Initial energy audit
The service’s starting component. It measures and analyzes the plant or clinic’s energy consumption to identify losses, bill-reduction opportunities, and investment priorities. The deliverable is a technical diagnosis that defines the efficiency roadmap and supports subsequent decisions.
Energy management system (EnMS)
Implementation of an energy management system (EnMS) that structures indicators, targets, and consumption monitoring to sustain measurable improvement in energy performance over time. This component turns efficiency into an ongoing operational practice rather than an isolated intervention.
Power quality studies
Measurement of the grid’s power quality parameters—harmonics, voltage sags, imbalances, and other disturbances—to diagnose the origin of faults in equipment and processes. When the study requires thermography, it is coordinated with a specialized laboratory to deliver a complete diagnosis.
Power factor correction banks (CREG compliance)
Design, manufacturing, and implementation of power factor correction banks to bring reactive energy to the value required by CREG regulations, eliminating the associated charges. As panel manufacturers, the bank is sized to the operation’s actual load.
Advisory services for corporate SDG compliance
Linking efficient energy use with the organization’s commitments to the Sustainable Development Goals (SDGs). This component connects technical efficiency actions with corporate sustainability targets and their energy performance reporting.
Diagnosis, design, and implementation of energy efficiency under a single provider
The service integrates energy audit, power quality studies, power factor correction, and an energy management system (EnMS) into a single engineering process. Measurement precedes investment, the solution is sized to the operation’s actual load, and implementation is backed by local after-sales support from a firm with 41 years in the Colombian electrical sector and its own plant in Yumbo.
